GOD - Helps You Handle

Made this for my mother and her Bible study friends for Christmas.

You can download the stand here.

https://www.printables.com/model/1063406-sign-stand

Updates

January 27/25 - Updated files and Printer Settings

Printer Settings

PrusaSlicer 2.9

Layer Height - .2

Perimeters – 2

Minimum Shell Thickness Top and Bottom – 1.5mm

Top Fill Pattern – Monotonic Lines

Bottom Fill Pattern – Monotonic

Skirt – 0

Brim – Inner brim only (Signs with Hangers)

Fill Angle - 90

Seam Position - I use Aligned on the Wipe Cylinder and signs with hangers. On the signs without a hanger, I paint the Seam on the bottom in the middle.

Wipe Cylinder

Height Range Modifier

• Start Height - 0.2
• Stop Height - 2.2
• Layer Height - 0.2

Add Settings – Infill – Fill Density - 0%

Layers and Perimeters

• Top and Bottom 0
• Perimeters 1

Make sure the Wipe Cylinder prints first.

Sign

Height Range Modifier

• Start Height – 2.6
• Stop Height – 2.8
• Layer Height - 0.2

Add Settings – Infill – Fill Angle – 0

Add Settings - Layers and Perimeters – Single perimeter on top surfaces – All top surfaces

Color change at 2.2mm

If you don’t like my settings and you have better ones let me know. I’m always looking for better ways to print things.

If you have any questions, just ask.

Please post pictures!!!

Filament used in the pictures

Prusa PLA Marble Grey and Galaxy Black