Faucet (tap) for children's kitchen

At first I didn't know if I would publish this simple model at all, but then I thought that it might make one person happy... and that's enough. :-)

If your kids have been playing with the kids' kitchen with such vigour that they've broken off the faucet (tap), here's a simple model you can use to fix it. The faucet is assembled in 5 parts (one is printed twice) and I recommend gluing the parts together with instant glue.

To keep the printing simple, I divided the tap into several parts. I printed it in PLA, but maybe PETG would be more suitable. I printed it with the following setup:

• 4 perimeters
• 33% infill
• supports (on some models)
• 0.2 mm layer height
• 0.4 mm nozzle width

The tap stand has a hole in it for a 4 mm diameter and 35 mm long screw (under which it is advisable to put a washer).

I am also attaching a .step file, for easier remixing.

Hopefully someone will use the model! :-)