Toothbrush cup - innerpart for 60 mm cups

Made an inner part for my toothbrush cup so the toothbrushes aren't standing in the water that drops down.

It is made for cups with 60mm in diameter. 

Height is 90mm.

Took about 16-17g of filaments with 

Easy to take out to clean your cup.

Printed with:

• 0.3mm layer height
• 0.6 nozzle
• 2 Perimeters
• White cotton PLA

Took about 16-17g of Filament

Make sure to print the first layer slowly so the structure gets a clean look and good adhesion to the build plate.