WR250R Chain Seal Guard

Printed part is 325mm on the longest face, meaning that you need at least a 295x195 print bed to print this.  or a 250x250 work too

I decided to try my best to reproduce the wr250r chain seal guard that protect the swing arm to get damage from the chains, printed and fit fine. Let me know how your print went, if I need to tweak my design so that it work on multiple printer (I only have 1 printer right now to test on). 

the rectangle groove on the side of the bracket is for a foam that is at least 1.8 mm thick (that is from the original concept, I might try without the foam).

Print Settings

Printer Brand:

Wanhao

Printer: 

Duplicator 5s

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

85

Filament:
taulman bridge nylon black

Category: Sport & Outdoors