Screen Frame

my reef tank need a screen, and I don't want to use aluminum, so here it is, work as a regular windows screen too.

This is a work in progress, this is for a screen dimension of 23 inch x 9.375 inch, it use 4 x 2 inch outercorner, 8 x 5.375 inch bar, and 2 x 2.875 inch bar.

that make the top and bottom 3 x 5.375 + 1 x 2.875 + 2 x 2(corner) = 23
and sides 1 x 5.375 + 2 x 2 (corner) = 9.375

I'll upload more size when this is working properly so you can build any type of screen frame you want.

but for now, this is a work in progress, do not print unless you don't mind wasting plastic, I'll remove this msg when I'm sure it's working for me.

Print Settings

Printer:

Wanhao D5S Duplicator.

Rafts:

No

No

Resolution:

200

38

Filament: PolyMaker PETG