Ender 3 V2 Stealthburner Mount with CR Touch

Stealthburner can be found on the Voron website:
https://vorondesign.com/voron_stealthburner

Hardware needed:
6 M3 threaded inserts to mount the Stealthburner to the adapter. (See attached picture for mounting location.)
4 M3x8 SHCS bolts to mount the adapter to the Ender 3 V2 x-axis carriage. 
2 M3x20 SHCS bolts with M3 Nuts to attach the CR Touch.

STEP file is provided if you need a closer look of where the hardware is installed.

The offsets for the CR Touch are X: 0 Y: 22

Printing orientation should be fine as is. Parts should be printed in ABS or ASA following the Voron recommendation. (PETG might work, but not recommended.)

WARNING: You will lose around 20mm of usable printing area in the y axis due to the Stealthburner sticking out forward more than the standard Ender 3 V2 hotend. Make sure you properly set the position_max on all your axis to avoid damage to the printer.

Remixed to fit the CR Touch probe in place of the BL Touch.