ERCF V2 Top Mount 500mm Extrusion for Voron 2.4 350mm
I modified the original file to have it fit on a 500mm for the Voron 2.4 350mm
12
89
0
619
updated
November 6, 2024
Description
PDFThis mod is to be use with 500mm extrusions that are easier to buy without custom orders. I also gave it more depth inside to grab more of the extrusion and be more steady. This is for the Voron 2.4 350mm version.
The extrusion that I used are linked below but keep in mind that you will have to tap the ends for 5mm screws.
500mm Extrusions - https://geni.us/lqq65
Tags
Model origin
The author remixed this model.
ERCF v2 Top Mount for Voron 2.4/Trident
Original model was switched to draft or deleted
Differences of the remix compared to the original
This mod is to be use with 500mm extrusions that are easier to buy without custom orders. I also gave it more depth inside to grab more of the extrusion and be more steady. This is for the Voron 2.4 350mm version.
The extrusion that I used are linked below but keep in mind that you will have to tap the ends for 5mm screws.