I have been having a hard time soldering the LED with the jumps due to many movements that make me solder my hand with the table. None of the solutions that I found were proper to my case, I wanted something straight forward that holds the jumpers in its place and center the jumper rod exactly into the soldering point of the LED.
This connector comes in 3 pins formats: 1-pin, 2-pins and 3-pins. It also comes in two design formats: LED to Jumper and LED to LED.
The original file is provided, so that you create your format in the way you like. Basically, you only need to copy & paste the jumper object and maximize it based on your dimensions and pins number.
The LED placement is suitable for any LED that has 1 to 3 pins with the width of 10mm.
Print suggestions:
How-to:
Available formats:
Remixes, Editing and publishing:
I support the open sourcing of original designs and encourage the contribution in such way. Please do credit me when using the design for your base, or remixing when not referencing this model.
Check my profile for other models that you may like, it's all free ;) ! I appreciate your support
Other models are posted on Bambu Lab forum too! https://makerworld.com/en/@levanter
The author marked this model as their own original creation.