Case RaspBerry + HDMI 5"

All-in-one case box to hold your Raspberry and 5-inch HDMI display all together.

The FEET fit into the back with an angle of 55°.

ASSEMBLY INSTRUCTIONS:

To fix the raspberry we must insert 4 M2x15 screws from the inside of the BOTTOM. The display pieces fit together through specific joints and then fixed with 4 M3x15 screws. In the back of the TOP display we must insert 4 brass inserts (with the soldering iron) in the prepared hole.

To fix the cooling fan, we need 4 M3x8 screws and 4 M3 nuts

The project is suitable for Raspberry Pi3/3b/4