Scraper tool holder

Tool holder for build plate scraper from Kaje.

https://www.prusaprinters.org/prints/28337-scraper-for-build-plate-version-2

With this model, you can hang the build plate scraper on the side of the Prusa MK3S+ power supplier.

Installation

• designed to not interfere with extruder assembly and x-axis assembly.
• you may need to apply some force to place the bracket onto the mainframe.

Slicing Instruction

• PLA or PETG (I used eSun's PLA+)
• Use modifier box to remove top & bottom layers and add your choice of infill pattern in the middle (refer to yoons_scraper_holder.3mf for reference)