Concrete Bird Bath Basin Support Ring

This is a simple ring intended to support a the upper basin of a two piece concrete bird bath for my parents garden.

This piece is to be glued/epoxied to the bottom of the upper bird bath basin.  The upper basin can then be placed on top of the lower concrete post which sits on the inside of the printed circle ring.

Printed using PETG with 0.2 layer height, 15% infill, 5 walls.

Dimensions as designed are 5-¼" diameter inner circle, ½" wide x ½" height outer ring.

Can be easily scaled on the printbed to suit your needs.