LEGO Discovery Space Shuttle Wall-mount - Without support

A wall-mount for the space shuttle - designed to fit the built-in mounting slots.

3h 24m

1× print file

0.30 mm

0.40 mm

85.00 g

166

1845

updated December 26, 2021

Description

I redesigned the model from JLevin to print it without support.

Print settings:

PLA / PETG (recommend)

min. 20% infill

To fix it on the wall, I used screws with a 5mm diameter.

I also recommend some higher angle as I used, but that's up to you!

The author remixed this model.