Funnel with sleeve for jug
No threads. Drops on and is stable due to the sleeve. No spill due to inner tube.
7
22
0
95
updated November 14, 2024
Description
PDFFunnel with sleeve for jug
Made to fit jugs:
- more than 30mm inner diameter hole
- less than 50mm outer diameter hole
Printing
- Print top down with brim some brim as the cantact area is low.
- No supports should be necessary.
Example funnel
Printed using PLA (0.2mm layers).
Use PETG if it should be oil resistant.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Part of the same design. No threads. Longer center tube.
