Do you have an Amazon link to a drum spring?
HORIZONTAL Print - Slim Angled Talon (compatible) Short Dart Magazine (13/10/8)
MINI angled talon mag which can be printed horizontally. This is more stable and does not cause those scratching noises.
121
364
5
2765
updated
April 4, 2026
Makes
Comments
I printed one magazine body to see if it would work with my Worker Nightingale 2.0 or Dart Zone Venom Pro.
It does not fit quite right, funnily enough in different places for the two blasters.
In the Nightingale the mag is slightly too wide on the front and back.
In the Venom Pro the ridges in the middle of the magazine are slightly too big.
With both probably a thing of one layer or two.
There is also no mag catch slot for these blasters.
I understand that this magazine wasn't developed with these blasters in mind, but I would love it if you could make it work.
I don't have the skills yet to make these changes myself.
works great
@3Dprinter210_3984276 thx for rating :)
Printed in petg - well designed as expected from Corvus. May make a shorter one to fit the grip bottom. (edited)
@Hamburglar007_651675 thanks :)
@AD_Designs thanks for sharing an rating :)
@AD_Designs What printed spring did you use?
View one more comment
Printed a ton of these for LeedleDynamic's Satakieli. Put printed springs from: https://www.thingiverse.com/thing:5537203/files in the 8rnd mags. Only dropped them to 6.
These work very well and slide in and out smoothly and stay in the mag well. I've been quite aggressive with them and haven't had one break on me yet, so they're quite sturdy.
@ThePhabPhantom thank you :)
Link to Satakieli T-pull? Haven't seen it anywhere else.
@AlexMarin_2606688 It's not released. It was my personal remix of the purchased files because I don't like ring-pull. Unfortunately, I can't release it without consulting Leedle.
@Corvus_1914958 Got it, thanks
Beautiful. Exactly what I needed for my Satakeli. Thanks!
sorry for being a nuisance but could you please post like a quick assembly guide for stupid people (me) thanks. it would be much appreciated ^-^
@thatguywitha_2541230 You can't go wrong. There are only three printed pieces per magazine ;)
can you make a list of hardware please with links im looking to make some blasters but angled talons cost a lot thanks
@thatguywitha_2541230
You'll need a spring suitable for Talon magazines or a drum spring and a small M3 countersunk screw for the bottom of the magazine. Talon springs or drum springs are available from Blastertime or OutOfDarts, for example. Depending on the size of the magazine, you can also cut a Talon spring and make two magazines out of it. (edited)
@KK0708_2805978 thx for sharing
@KK0708_2805978 Sorry, what printed spring and follower did you use for your mag?
View 2 more comments
Can a longer version be made for higher capacity?
@ChristopherC_2633007
Oh, sorry, I must have completely missed your comment.
I just added a 13-dart version of the magazine.