HORIZONTAL Print - Slim Angled Talon (compatible) Short Dart Magazine (13/10/8)

HORIZONTAL Print - Slim Angled Talon (compatible) Short Dart Magazine / MINI Angled Talon (compatible) Magazine (13, 10 and 8 darts)

This is a remix of the horizontal print magazine by Astropulse which can be found here
Horizontal print 31K/Diana magazine von Astropulse | Kostenloses STL-Modell herunterladen | Printables.com

I added the back notch that come with the slim angled talons and removed the 31k notch. I also added a version of the follower for regular talon springs (wire springs).

Horizontal mags slide smoother, get stuck less, and sound quieter when loading/unloading.

A big advantage of this is the print direction of the feed lips, which makes them much more difficult to break when printed horizontally.

The files are already preoriented. 
DO NOT use supports inside the magazine!

Keep an eye on the result of the bridging inside the magazine. If there are any messy spots, you will need to rework them a little with a small file.

• UPDATE 8.1.2025:
  Added a flush version of the bottom plate.

• UPDATE 29.4.2025:
  Added 13 darts versions

Click here for some more HORIZONTAL PRINT magazines for short darts

-----------------------------------------------------------------------------------------------------------------------------

My print settings for PLA:
0,2mm layer height
5 walls
at least 5 top and bottom shell layers
20% gyroid infill
Tree support on feed lips and back notch facing the print bed, optionally on drum spring clip.
 

notch for talon mag catch added on the back, 31K magazine mag recess removed on the front, a version of the follower for standard talon magazine springs added