Rugged Heater Bloc Base

MUTUAL AID IS HOT

Material: Regular PLA is okay. Avoid especially brittle filaments. ASA, ABS or PETG are preferable. 

Nozzle Diameter: 0.8 mm

Layer Height: 0.3 mm

Infill: Turn off

Top and Bottom Shells: Turn off

Perimeters: Set to 6, or enough for the model to print as a single connected piece. Small holes where perimeters don’t meet are okay.

Seam Placement: If printing text on the model, ensure seams are positioned away from the text for a cleaner finish

I haven't had any adhesion issues using a textured build plate, no adhesive.