MX5 Magsafe iPhone 14 Mount

I included a paramaterized Fusion 360 file if anyone would like to modify it for their needs.

Print suggestions:

I printed with:

• 4mm nozzle
• 0.2mm layer height
• PETG (would recommend ABS or material more suited for UV/heat)
• Tree supports (only touching build plate)
• 1.6mm walls
• 20% gyroid infill 
• Printed on a 60 degree angle with part 3mm of the top submerged under the build-plate to help the model adhere to the build plate.

Differences from the original:

• Made for Apple Magsafe Charger
• Specifically made for iPhone 14 with Spigen case
• Has “wings” to help hold the iPhone in place when hitting bumps or going around corners
• Adds a “cutout” at the bottom of the magsafe holder large enough for a flat-head screwderiver to help pry out magsafe charger when needed.

Differences from the original:

• Made for Apple Magsafe Charger
• Specifically made for iPhone 14 with Spigen case
• Has “wings” to help hold the iPhone in place when hitting bumps or going around corners
• Adds a “cutout” at the bottom of the magsafe holder large enough for a flat-head screwderiver to help pry out magsafe charger when needed.