Bass Shaker Mount

The mount is designed to be attached to Aluminum extrusion profile 4040 via couple of M6x20 bolts (18mm M6 washer recommended), 4080 via 4 M6x16 inbus bolts or under Fanatec CSL Pedals, directly under brake pedal via couple of M4x40. 2 M4 nuts must be placed onto mount upper side.

I printed it out of PETG, 6 Walls, 25% Cross Hatch infill, No Supports.

The bass shaker is attached to the mount via 8xM3x25 bolts and M3 nuts placed on the mount bottom.