Peloton exercise bike

Model of the Peloton. Both a single-piece and multiple-piece (for assembly) files provided.

Print Settings

Printer Brand:

Anycubic

Printer:

**Rafts:**

Doesn't Matter

Supports:

**Resolution:**

0.12 but 0.06 on smaller parts

Infill:

**Filament:** doesn't matter PLA your choice

Notes:

Post-Printing =============

Depending on the size you choose and your particular printer, you may need to drill out some of the holes a bit. I have not tried printing the one-piece STL -- good luck! I prefer the split version of the reaction wheel, as it's easy to glue together and makes both sides look better than if supports needed for the single-piece wheel. Print six of the "feet" and two of the "frame clamp" adjustment levers.

How I Designed This

I found a SKP file somewhere on the web; lost the link, sadly. Converted to an STL which had many faults and would not slice. Then I took the object "apart" , fixed each piece, added holes and tubes for assembly, built up parts that were more or less hanging in mid-air, and so on.

Category: Sport & Outdoors