Mandala Frame

Modular frame for mandalas. The model is 1/8 of the entire circle. The frame has hooks that allow you to spread the pattern. The part adjacent to the wall has notches for the mounting hook and grommets for the LED strip power cable. After printing, the parts need to be fitted and glued together. For a better effect when gluing, it is good to use a carpenter's clamp.

Printed using PETG, of course you can use any filament.
Layer height 0.2, in my case printed on ender3 so for other printers it won't be a problem :)
The whole hoop has a diameter of 800 mm. On the ender3 bed scaled to 95% to fit and after folding it is about 770 mm.
Without supports!
Number of walls and floors 3.