Guide PC210 macro adapter - lens holder
Use a 12 mm ZnSe CO2 laser lens as a macro lens on the Guide PC210 thermal imaging camera.
0
19
0
144
updated
November 2, 2024
Description
PDFThis is to allow using a Guide PC210 thermal camera for electronics repair. It mounts a cheap 12 mm ZnSe lens (China PVD quality is what I used, these are cheaper) to the PC210.
I have printed in PETG and used Hilbert Curve and 1 perimeter on top for looks.
The lens hole came out a bit tight - I'm not sure is that was the lens or printer tolerances. I did widen the hole a bit to allow a press fir for the lens.
Be careful when fitting the lens - the lens material is toxic.
Created in FreeCad 1.0 RC2.
Model origin
The author marked this model as their own original creation.