Pop-up Santa Ornament - Christmas Xmas Gift, Toy, Bauble, or Decoration

Notes:

• Little Santa Claus that pops out of an ornament when you push back the lid!
• Gift this ornament, play with, or hang it on a tree

Printing:

• I printed with 0.4noz, 0.2 layerh, gyroid, PETG for Santa, Silk PLA for the rest:
• Red Santa:
  • Start with Red or what color you desire Santa to be
  • Optional color change to white: 20.00mm (for Santa's hands)
• White Santa:
  • Recommended to print after Red Santa if you performed the color change for Santa's hands
• Ornament:
  • Enable Supports
    • Overhand threshold: 5 degrees
    • Style: Organic
• Hook and Hoop:
  • Max vertical shell perimeter (walls, solid)

Assembly:

• Refer to the last photo for assembly:
  1. Combine and assemble 2 Red Santa parts with 1 White Santa part
  2. Secure Santa to the ring/hoop attached to the lid (push/slide together)
  3. Check Santa fits inside the ornament lid as displayed in the picture
  4. Insert the square rod into the square hole of the side ornament part
  5. Using the lid with Santa (from step 3), insert the shaft into the ornament body
  6. Use the side ornament part (from step 4) and push it together with the ornament body and lid with Santa (from part 5) so all the shafts fit into the holes
• Secure the hoop and optional hook to the ornament and its ready to hang on a tree!

Have fun printing!