Golf - Divot Repair Tool - Club Grip Support

Description

For the conscientious golfer who fixes their ball marks made due to hard impacts with the green surface by their ball so that other players can also enjoy a smooth green surface.  This version can also be used to support the a club grip off the wet ground.

Usage
Divot repair tool - Ergonomic design with thumb and finger placement zones.  Grip tightly and press spikes vertically into the surface 3-4cm deep along outer edge of ball impact (divot) area.  Next press fixer towards the center of the impact area and remove divot fixer.  Repeat process on 3 remaining perpendicular sides of the impact area.

Club grip support off the ground holder - when having to leave a club lying on the ground place the divot fixer into the ground and rest the club grip on the end of the divot fixer in the groove.

Printing Tips

• If printing using SLA printer (best results)

  • Print at 35 degrees from vertically with plenty of support

  • 0.05mm layer height and solid (no hollow spaces)

  • Use ABS Like resin

• If printing using FDM

  • Print using PETG

  • Print with flat surface down and supports for thumb placement area

  • Print with 2 perimeters and 0.15mm layer height with 25% infill

Testing

Actively using this on the golf course for fixing divots and supporting the club grip in wet conditions.  Ends are sharp so be careful not to jab yourself.  So far works well and has not broken.

Change Log

• November 2024 - updated the original V2 version to remove the ball marker and instead have a support to hold a club grip off the ground.

Support

If you are interested in the Anycubic Photon M5s Pro SLA printer (I use this one) or other Anycubic printers and want to learn more please go to Anycubic Store.   For $20 off use this CPMTPFIZJP coupon code at the Anycubic Store.

This version does not have the ball marker holder and instead the end is designed to allow a club grip to be kept off the wet ground.