RPi Camera and GPS Data Collection Device - Open Data Collection Project

This model is a combination of the Camera Module, GPS Module, and RPI and PiSugar Model for the Open Data Collection Project. More information can be found at the Github Repository link below:

https://github.com/hleve/rpi_data_collection

The Raspberry Pi Zero model can be found here: https://www.printables.com/model/988094-raspberry-pi-zero-2-w

This project can be printed in PLA, but for better UV resistance for outdoor use, ASA is the recommended material.

Note: To install the Raspberry Pi Zero and PiSugar battery in the housing, first detach the RPi and the battery, then place the Rpi in the top of the case, sitting on the shelf pieces, then add the battery from the bottom and screw together to sandwich the shelf pieces.

Combination of modules into a single module that attaches to the brim of a hat