Action Cam and Light Bike mount

Free and customisable OpenSCAD file

With the CamBox.scad model, all parts for the mount can be customized and prepared for printing.  My 2 action cams are very similar in size and both fit equally well in the housing. The main difference is that the power button is at the top and bottom. The lid is held in place with 4 magnets. However, the cameras also hold securely without the cover while driving.
The housing is fastened with 4x M3 nuts and M3x20mm screws and the two brackets. 

To attach the light, I cut an M3 thread in an 8mm x 18mm aluminum and then attached the light holder with an M3x18mm screw. The light holder (Lightholder.scad) is suitable for cheap lamps available from a German discounter. The upper guides are slightly conical.

Printing

I print the holder with the opening facing upwards and automatically distributed, organic supports.