Airsoft Tracer Housing/Mock Suppressor

The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter than the long version. With the base (original model from creator included for both CW and CCW threads), the total length of this crowned version comes to 5-1/8". Let me know if you have any questions or need any help!

Infill -25% Crosshatch 

Walls- 3

Supports- Yes (normal using snug setting if you have it to reduce scarring, on build plate only)

Layer Height- 0.2mm

(The filler is designed to fill the entire cavity of the housing, if you are using a tracer unit, measure the length of that tracer and subtract it from the filler length (83.5mm) then scale the filler down to the difference. This will ensure your tracer is kept stationary and aligned! If you need help with anything, please just leave me a message and I'll do my best to help!)

This is a medium version about an inch shorter than the long version, this includes the new filler piece as well.