Adapter for Elegoo Mercury Plus v1 for Qidi 6.08 Mono Build Plate

This is a replacement part for use in the Elegoo Mercury Plus (v1) build plate hanger.  Replacing the original “sled” build plate mount with this print allows use of the Qidi 6.08 mono build plate in the Mercury wash bucket.  Threads for the thumbscrew should be cut with an M4 screw before attaching with the mount's thumbscrews.  A bit of silicon oil can make thumbscrew use easier.

An M5 screw can be used to secure the build plate to the mount (the thumbscrew won't have clearance).  I didn't have any M6 screws handy.  If you do, drill out the mount hole a bit to use that.