DDMM Sliding Deck Calendar

+Figma Design added

A desk calendar which displays the date in DDMM format. Requires no AMS / multicolor printing, colors are separated into different parts.

Assembly

1 - Glue Slash Separator to Base Part
2 - Glue Light colored parts to relevant dark color parts.
3 - Place glued plates into the base
4 - Put the assembly on top of the 45 Degrees Holder.

You're ready, at every morning, you can change the pull the numbers put to the last row by rotating reverse.

Parts with Dark Color

**Base** : The main holder part, which keeps the number plates

**45 Degrees Holder** : The part, which holds the system at 45 degrees

**Plates** : There are 3 segments; A / B / C

For first D: A-0-2 and A-1-3 (qty : 2)
Second D : All the B segment plates (qty : 5)
For first M : C-0-1 (qty : 1)
Second M : All the B segment plates (qty : 5)

In summary, you'll need 1 set of A's, 2 sets of B and 1 set of C's.

Parts with Light Color

0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / Slash Separator : The parts which creates contrast to the plates

You'll use the numbers for these plates;

0 - Qty : 4 - A / B + B / C
1 - Qty : 4 - A / B + B / C
2 - Qty : 3 - A / B + B
3 - Qty : 3 - A / B + B
4 - Qty : 2 - B + B
5 - Qty : 2 - B + B
6 - Qty : 2 - B + B
7 - Qty : 2 - B + B
8 - Qty : 2 - B + B
9 - Qty : 2 - B + B

I recommend enabling ironing to Color B parts.

You can use any layer thickness up to 0.28 mm.