Filament Spool Honeycomb Wall Mount/Holder/Rack - VAROE

This model needs to be used with dowels. The holes of the mount are having 24mm and should fit 22mm & 23mm of (wooden) dowels (like in my case).

If there are a lot of wished for a certain measurement i can adapt it aswell :)

I recommend it printing with some more infill (40%+) and maybe thougher materials. Maybe you have to check on your own. In any case just use more of the mounts inbetween of a dowel.

If it's very close and the dowels are barely not fitting - just use a little sanding paper and sand down the holes.

The pattern of the model changed to a honeycomb look. Remixed it to fit the overall style in my workshop.