Tikka T1x Bolt Disassembly Tool

Available as a free STL download

Go to my website at masiinatek.com for purchase as an already printed part.

There are three geometries in the block that interact with your bolt:

• Hole for the bolt face. Use to de-cock and re-cock and to compress the striker spring for reassembly.
• Half circle with the shape of the bolt rear. Use to remove and reinsert the bolt rear pin that holds in the striker pin and the plastic cover.
• Half circle with the shape of the bolt middle. Use to remove and reinsert the bolt center pin that holds in the firing pin.

Here’s a video showing the various different ways the block can be used to help with disassembly and assembly of the Tikka T1x bolt. An English language version of the video will be coming soon.

Please only take apart your bolt if you are confident that you can put it back together 😉

3D Printing Instructions

Default print settings work just fine. If you encounter troubles with durability consider using a higher infill percentage. I use high infill with the honeycomb pattern to guarantee a high compression strength.

Any plastic will work, I use ABS.