Toolbox handle

In my quest for a self-contained toolbox style handle, I started with the handle from a Ghostbusters prop (https://www.thingiverse.com/thing:1579200)

I also made a beefy version sized for a large hand (my own). Print your preference.

Inside handle width is ~4".

6 fasteners runs through the pivot and are nutted on the other side. to provide as much strength as possible. There's enough clearance in the joint where you should have full screw thread engagement in the captured nut while still allowing the handle to rotate freely but YMMV.

Assembly Hardware:

6-32 socket head screw - 1" long:
https://www.mcmaster.com/91251a153

6-32 hex nut:
https://www.mcmaster.com/96537a130

Attachment Hardware:

8 Flat head wood screw

Print instructions

No support/raft needed.

gcode resolution is 0.3 layer height and 10% infill.

STL UNITS ARE IN INCHES

I adapted the model to fit with 3D printed pivot points that are face-mounted onto whatever you desire!