Passthrough Tic Tac Toe (With a TWIST)

Tic Tac Toe Vortex Passthrough Model

This is a great model that is extremely fun to print, play, and tweak! Its a really cool model because of the way its designed and the functionality to it! Sometimes it will take a bit longer because of the complex insides but that's not a big deal, once you print it's really fun to use! This is the 0.5 (Beta) version of this model, I'm constantly making more updates to it to make it even better! Hope you enjoy!

This is a fun game for tic tac and has a nice twist to it like Connect 4. Instead of being able to place your pieces anywhere on the board you have to slide it all the way down. That makes the game a bit more unique.

Also I would like to say, this is going to be a hard print, so please beware that as long as you apply the right settings it should work. I have printed this model multiple times to ensure it works so, if yours does not work, its most likely not the models fault. 👍

I was inspired by Evet17 on Makerworld because of his Connect 4 version! So I decided to make my own in Fusion 360. For the record this is my model, however the idea of the model has come from Evet17. 

Also on my patreon page I have released the Design Files & Commercial License! Make sure to check it out! Design Files & Commercial License Passthrough Tic Tac Toe

Make sure to check out my patreon page! If you join for free you can receive (free) exclusive models only on my patreon! Also have access to more updates, polls, requests, and many other things!  My Master Printer Patreon

*IMPORTANT*

There is a must do setting that you have to enable! In prusa slic3r go to ‘print settings’ then navigate down to 'advanced' (on the side bar) and find XY Compensation. If your printing the inner part make sure to turn the compensation to ‘-0.05’ also when your printing the board set the XY Compensation to ‘-0.2.' 

Also you really want to avoid stringing for the inner pieces, so I would highly recommend doing a sequential print, so then you don't have to keep coming back to print the pieces every 10 minutes. 

Also this is something I don't normally do, but I have uploaded the .3MF file so that you can have the settings I've already applied to the print. I hope that helps!

If your having adhesion issues try using a bed sheet that has more friction. I would not recommend using the brim unless you are able to get all of it off. 

Print Settings: 

Infill: 30% to 50%

Infill Type: Gyroid

Supports: NO

Brim: NOT Recommended

Filament: PLA or PETG

XY Compensation: ‘-0.05’ for the inner piece & ‘-0.2’ for the outer piece.