Bunnings Montgomery Interlocking Drawers Printed Base

Looked around and couldn't find any files for these series of interlocking bases from Bunnings (https://www.bunnings.com.au/montgomery-grey-interlocking-60-drawer-organiser_p0338283 or https://www.bunnings.com.au/montgomery-grey-interlocking-39-drawer-organiser_p0338282) and wanted to attempted to make a simple base for the bottom. Still retains the ability to link them horizontally and vertically above.

Print in 2 parts, interlocking with dovetails. Fitment was fine for ASA.

Currently works with friction fit so i don't need to change it up anymore for my use, I'll have the printable file and the .step file provided in case you need to edit it or change it for a specific use.

I personally added a step to cover the gap between my table and the wall so i didn't have to drill any holes in my wall to support the drawers.

I still recommend securing it to the wall if you are just going to print the flat base, as it is still pretty top heavy, plus the surface area of the basic base is pretty small.

I haven't used much cad programs so it is not the best.

Thanks