5-1/4 inch round speaker enclosure

This is a 5-1/4 inch round speaker enclosure. The total speaker depth is 50
mm.

The screw holes for the speaker are 141 mm diagonally.

You'll need 4 x M3 brass inserts, 4 x M3 x 4 mm screws, 1 x terminal block for
the speaker connections with the related screws and nuts and finally some
wires to hook the speaker to the terminal block. A dab of glue is also
required to mount the front grill.

You will need to print 1 of each for each speaker. Support is not required. An
infill of 20% is recommended.

This object main web page is:  
http://www.ctheroux.com/5-1-4-inch-round-speaker-enclosure/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.