Hi! Please is it possible to get step files? I want to make it 1:10 RC with two 550 engines (each for 4 axles), planetary gear in each wheel (to run axles at low torque) 6 steering axes and missile elevation, but it will need a many changes.
MZKT-79221
A model of the MZKT-79221 16x16 transporter-erector-launcher
475
1402
12
10 k
updated
April 23, 2026
Makes
Comments
Hello, my friend,
The MZKT-79221 is a very beautiful model; I plan to print and build it. Could you please modify the doors so that they open?
And perhaps a Topol-M for the silo?
I would be happy to pay you for this.
The goal is to build it as a 1:16 scale RC model.
Best regards
Очень крутая модель, автору большое спасибо! Некоторые узлы незначительно доработал, сделал не быстро, но зато теперь наслаждаюсь👏🔥👍 (edited)
huaaah!!!!!!!
Modello fantastico!! Puoi dirmi a cosa servono i file suppo1, 2 e 3? (edited)
errore mio si tratta di 3 pezzi da usare come supporto per tenere allineamenti in fase di incollaggio...non sono necessari per il modello..visto anche il tuo gran bel lavoro!!!
Paolo
Здравствуйте,а где можно взять инструкция к сборки данной модели?
@_4278793 Я не создавал инструкцию по сборке, но разместил чертежи с выделенными деталями, которые необходимо собрать.
Took a long time to print but it was worth it and I absolutely enjoyed making this. Any chance I could make a Churchill tank ? Would love to make some more tanks
Any interest in steam locomotives? I'm finishing a 350-piece project that turns the missile launcher into a toy...much more complex...
@Paolo well not really into locomotives if I'm completely honest
Hi all does anyone know what number this is for the front of the vehicle please see pic I'm having one of them moments lol
if you look at the drawing attached to the stl files, you will see that I have highlighted the front part of the vehicle and the files that are needed...if I'm not mistaken boby 100 and 101....
@Paolo thanks
Hi all I have printed all the parts but just want to make sure it's correct before gluing etc. Does the section for the middle gets glued? As not sure how it stays together I have attached a photo hope that helps
yes the central section needs to be glued BUT it seems to me from the photo that the 2 sections are positioned too far apart from each other..the distance between the two must be less..otherwise the internal compartment will be too wide!!!
@Paolo thanks for getting back to me I wanted to check before gluing it
huahhhhhhhhh!!!!!!
@_582088 hi body24 goes on this bit
Cool model, took awhile to print and build but worth the time and effort. when building it make sure to look at the diagram real closely. I missed a couple of parts and had glue down parts that went above them. Mainly the steering axle parts. And if anyone wants to print it at 1/35 scale, I scaled all the parts down to 89.01, and seem to be pretty close to it.
Nice color!!!
@MarcusWelch_2425798 1:16 will ich RC