Flat-Edged AirPods Pro (2) Case

Printable case for Apple AirPods Pro with flat edges. I've designed two versions, one for the AirPods Pro and one AirPods Pro 2 case. Their dimensions are identical but 2 features cutouts for the bottom speakers and the side holes to attach a carry band.

The model is designed to be printed in PLA and fits tightly around the AirPods. I did various test prints and am quite happy with the fit. The case and the lid do not come loose during every day use. Also, wireless charging still works really well with this case. 

Printing

I've printed both parts with the round bottom and top facing to the top. This way I was able to achieve a perfectly smooth outer shell. The model is optimized for bridging, so the supports are only needed at the back. However, for some reason PrusaSlicer offers the control “don't support bridges”, but some of my bridges are still supported. If I check the same box in BambuStudio, it works just fine. Now, I've added manual supports to the files where they are needed. If you know a way to make the supports work just like in BambuStudio, please let me know.