The Tape Matrix — Auxiliary Module 03

Modular Cassette tapes rack -- Auxiliary Module 03.

As the tittle suggests, this is a modular cassette tape organizer. On its own it does not have anything special, but you can combine it with many different futuristic-design panels and create your own cool, cyberpunkish cassette wall !

There are 4 types of main Cassette Modules:
- 1-unit with separations
- 1-unit with no separations (good for cassettes that have a thick paper sleeve or unusual width)
- 4-unit with separations
- 4-unit : 3 blocks with separations / 1 empty block

— If you want to secure your tape rack to a wall, you can use the blank panels with 4mm central hole modules available here: https://www.printables.com/model/1094478-the-tape-matrix-wall-fixing-auxiliary-panels

***********************

🛠 PRINTING TIPS

— You can 3D-print the Tape Matrix in any material or color (you can also experiment with different top fill patterns), or follow the STANDARD COLOR SCHEME: black shelves with color accents.

— Assembling: All Kura Curiosa modules use M3 x 8mm screws & M3 square nuts (5.5 x 5.5 x 2.6mm)

— Best to use a 0.4mm nozzle. (test tolerances with larger sizes)

— Best to use a brim to avoid lifting.

❓ SUPPORT & RESOURCES

• Complete FAQ: https://www.baptistetavernier.com/faq

• MODULAR GRID: https://www.baptistetavernier.com/grid

• Project’s website: https://www.baptistetavernier.com/cassettes

—————

© Baptiste Tavernier