Halloween Witch Glasses

Get in the Spooky Spirit with these Scary fun Witch Glasses in Celebration of Halloween. I included a Non MMU Print File for the Frames for those that don't own a Multi Material Unit as well as an MMU Model (4 Parts), meaning multiple parts one model (for those that don't know about that). Import all parts into Slicer together and choose your colors accordingly, or you can choose Multi Material Painting. For the Temple pieces, a simple color change at desired layer heights or one solid color. I used 2 M2 x 10mm Hex Socket Head Cap Screws to attach the Temple pieces to the frames. You can scale up or down as you desire for better fit, 100% seems perfect to fit over prescription glasses, I scaled down to 90% for myself and it seemed just right. Print as oriented, I used 100% infill for added strength and Support Enforcers on the Temple Pieces just at the Ear end. Brim if you feel necessary ( I didn't need one). I also used a Hair Dryer to warm the Frames at the nose to form a slight bow to contour for your face then ran under cold water to set. The Witch was modified from Sot Kon's Halloween Witch to fit my Glasses design. This Model can also be found here https://www.thingiverse.com/thing:6809353/edit. Happy Halloween !!!!!!!