Simple Star Wars Keychain

Simple rectangular Star Wars keychain. Has the 'Star Wars' text in the exact logo format. Requires pause at layer or AMS

updated October 28, 2024

Description

It has a 2.75mm hole for the keyring

Ideally, it requires a color swap for the text (Either a manual pause at layer or AMS/AMS-Lite). It will still work without one.

No supports/brim required.

Recommended settings - 0.16/0.20mm layer height with a 0.2/0.4mm nozzle at 5-10% infill

The author marked this model as their own original creation.