Flair 58 - Drip Tray - Cup Raiser

After seeing the drip tray of the Odyssey Argos, I had the idea to do the same for the Flair 58.
If you are like me and you are tired of changing cups quickly so as not to dirty anything, this model could be for you!

Print Recommendation

For some reason on my Bambu Lab A1 I had to flip the splasher as the software recommended. I thought this was worth pointing out.

Parts required

• Optional - The magnets that I used are 5 x 3 mm but their real dimension are 4.9 x 2.7 mm. (Let me know if the holes are too small for you.)