Agemonia Item Tokens Trays

While playing the game we found it VERY annonying how each time we needed an item, we had to go through dozens of tokens to find the one we needed - it interrupted the flow of the game.

So… spent A LOT of time designing these trays for all the items in the game. The lids keep them safe in place, look gorgeous and have an ‘index’ for finding the items. All spaces are sized to the count of tokens (see below table).

These need a printer with a bed of at least 265mm on one axis. I printed them on my Prusa XL. 

I include STLs but there's A LOT of them… better use the 3mf:

• Design 3mf are exported from Fusion 360, ready to import into any slicer.
• Print Setup 3mf is my own setup for Prusa XL for 0.6 nozzle with colors and everything set (do check temps as I print a little bit warmer given my hardened nozzles).

Added 2 ‘mono’ files for people with single color printers. Tips:

• Add a filament change 1.2 mm before model maz Z so you have the accents in different color.
• If your printer is not big enough (ie, MKx), split the model using the Cut tool in PrusaSlicer, then glue them together. The lids… as they are so thin, will be very difficult to glue well together…. 
  • I have been told in comments the lids will print on a MK when put diagonally and removing a bit of elements.
  • As well see in comments example of someone splitting and printing main part in the MK!

Added as well a model of the lid for single color printers, where the text is raised above the print bed 0.4mm. I have NOT tested this… it should work! And with a filament change between 0.4 and 0.8 you should be able to have color on the text and logo. Let me know if it works! 

I sell these on my Etsy shop, I love sharing with the community but please do not use them commercially. 

Please give it a like and share your makes!

The ones in the photos have a few mistakes already corrected (couple of labels).  Below a table of the token count I used as guidance.

Update 19.04.2025 - the wells for Scrap Iron and Lanium Ore did not have enough space for all tokens. Now fixed! 

As well did a version of the lids for single color printers with text raised, this should work but has not been testing. Added as well a model of the lid for single color printers, where the text is raised above the print bed 0.4mm. And with a filament change between 0.4 and 0.8 you should be able to have color on the text and logo. Let me know if it works!