K1 Max Storage Drawer

This drawer is 300mm x 300mm x 19mm and is designed to hold most of the various tools that comes with the K1 Max along with plenty of compartments for screws, nozzles and whatnot. 

There are 1, maybe 2 exceptions to what will fit under the printer though. First, the glue stick is not going to fit under the printer, it is way too thick. Second, the spatula barely fits under the printer without the drawer. The bottom of the drawer is 1mm high and the spatula handle will rub slightly on the bottom of the printer when opening and closing the drawer. I took a bit of sandpaper to my spatula handle and it fits just fine now.

The pull handle is glued on. I included a pair of 2mm holes in the bottom of the handle that can accept a 10mm piece of filament with a bit sticking out. Apply some glue to the bottom of the handle and use the filament to align the handle with the holes in the drawer.

Print Settings:
Material: PLA
Layer Heights: 0.2mm
Walls: 3
Top/Bottom: 3/3
Infill: 15%
Supports: None