Ender 3 Z Axis Limit Switch Mount with 2.5 mm Drop

This is a remix of the Ender 3 Z Axis Limit Switch Mount shared by Motovader72. This drops the z-axis limit switch 2.5 mm.

On the Ender 3 Max the z-axis limit switch location cannot be adjusted out of the box. On mine, the switch was just a little too high, causing the tension on the bed springs to be a little too loose. I could have added t-nuts or spring caps, but wanted to try my hand at Tinkercad.

I've included 3 files. One is the complete bracket with the 2.5 mm drop. The other two are the bracket split apart so you can put them together and set any drop you like. There would be some limit on how far you could drop before the gantry hits the bracket.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

Doesn't Matter

Supports:

No

**Resolution:**

0.2 mm

Infill:

50%

**Filament:** eSun PLA+ Fire Engine Red

Notes:

50% infill is really sturdy. You could probably get away with a lot less.

Category: 3D Printer Parts