The GlenCairrier

This is storage solution that can hold up to 16 Glencairns or similarly shaped glasses. Included in this project is a mini-glencairn adapter.

In the four corners of the lid and container body are holes where 5x2mm magnets can be inserted to secure the lid better (eight magnets used in total).

I printed this on a Bambu Lab P1S so I had to chop the bigger parts into four pieces. This is why there is a file called Lid_Brace.stl. It sits in the middle of the lid to stabilize the 4 pieces. Affix using your preferred PLA bonding material (I used CA glue).

As for print settings, 10% Rectilinear infill worked well for me. The MiniCairn_Adapter.stl piece could use supports, there is some overhang.