Bambu Lab X1/P1 nozzle wiper with A1 Brush

Raised the brush platform by 1mm so it cleans the nozzle better. Original one had the brush barely touching the tip of the nozzle.

Installation instructions from the original model:

Only two screws are now necessary and installing the brush is the last step and could only be done if the part is already fixed on the poop chute.

1. Mount the original nozzle wiper
   
2. Mount the block to the poop chute
   
3. Install the brush (cut to 10mm length)
4. 

Raised the brush platform by 1mm so it cleans the nozzle better. Original one had the brush barely touching the tip of the nozzle.