*NEW* Filament Storeage Solution - 100% 3D Printed

If you enjoy the model, please leave a Like or a Make. It's free for you and helps me out a bunch!

Summary

This modular connector part holds filament spools together for organization on a desk or shelf. I found the other storage methods taking a long time or requiring you to buy extra items, so I made this solution 100% 3D-printed and fairly fast. Let's get into the good stuff:

Important:

- Flip the model so the wide part is at the bottom when slicing. This uses less support and significantly reduces print time.

- Works on all spools with an inner diameter of 53mm or more.

Print Settings

• Supports:

Yes- Touching Build Plate Only

• Resolution:

.2 mm

• Infill:

10%

• Print Speed:

200% (≈90m/s)

-Feel free to edit the .stl and .f3d files; Just give attribution where attribution is due

-Also, if you have any feedback on the model, leave a comment, and I will (probably) make an update.