PTFE Filamentguide für MK3S+/MK3.5(S)

The following parts are required for assembly:
1x M4x10 countersunk screw
1x M3x10 countersunk screw
1x M3 nut (forMK3.5 Tubeholder_Bottom)
1x M4 threaded insert (for MK3.5 Tubeholder_Bottom)
https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs
3x M5 threaded insert (for FS-Cover and MK3.5 Tubeholder_Top)
https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m5-short-50-stk-pcs
3x d=4mm hose coupling M5
https://www.amazon.de/dp/B081NDL8K5?ref=ppx_yo2ov_dt_b_fed_asin_title
1x PTFE Tube l=440mm (from the Extruder to the Tubeholder)
1x PTFE Tube from the Tubeholder to your Drybox or Storagebox

For mounting on the printer, the FS-Cover and the right Z-Axis-top must be swapped, the Tubeholder_Bottom must be screwed onto the Z-Axis-top with the M4x10 screw and the Tubeholer_Top must be fastened with the M3x10 screw and M3 nut so that it can swivel freely.

changed the FS-Cover and Z-Axis-Top (right) so I can Mount the PTFE Fittings