CUPRA Neon LED Sign/Logo

This Cupra Logo was made to kind of resemble old neon signs.

Building instructions down below:

Transalp Logo (same Style): https://www.thingiverse.com/thing:6063875

Print Settings

Printer Brand:

Anycubic

Printer:

i3 Mega

**Rafts:**

No

Supports:

No

**Resolution:**

0,2

Infill:

100%

**Filament:** Anycubic PLA blackPost-Printing =============

Building Instructions

For easier printing, it was divided into 4 parts, which then have to be glued together.
Try to glue them together on an even surface with the upper layer (not the side with the bracing) down, to have a perfectly flat surface so you won't have problems with light leaking out later.
Then install the led strip. Push it as deep in the corners as you can without destroying it.
Route all cabels out the back (backside is the side with the bracing struts).
Now glue the assembly with the front onto a PC (Polycarbonate) Plate and cut it out. For me a hacksaw with a blade for metall worked best, and a file to smooth everything out.

Category: Signs & Logos