Sprite Extruder + BTT Micro Combo

Sources i used : https://www.thingiverse.com/thing:6766639 , https://www.thingiverse.com/thing:6674744 .

Summary

Hello, i just got the BTT Microprobe today! Very excited as its my first ever ABL tool, and this would be my first remix as-well.

I "CUT" 19x9mm off the side where the "MOUNT' goes.. this is required for Gicutzu's Adapter for Microprobe - Sprite extruder.

Was starting to fit the probe together than realized, hey this doesn't quite add up here. Than realizing he cut his.. i didnt feel like nor had tool to cut mine.

The removal of this cut out allows the same offsets to be used and provided by Gicutzu.

#define NOZZLE_TO_PROBE_OFFSET { -29, -27, -1 }

For supports on both products, i used 10% density and 30° overhang. 2hr 50m @60mms

Print Settings

• Printer brand:

Creality

• Printer:

Ender 3 Pro

• Rafts:

No

• Supports:

Yes

• Resolution:

.2

• Infill:

40

• Filament brand:

eSun

• Filament color:

Light Blue

• Filament material:

PLA+

I "CUT" 19x9mm off the side where the "MOUNT'.