QuickClick adapter for Ryobi Jig Saw.

Adapter for connecting a Cen-tec Quick-Click dust extraction hose to your Ryobi R18JS Jig Saw. It might fit the other jigsaw they make, but it is not tested.

Prints well standing flat on the bed. It needs support and since the “shield” is thin you might need a brim.  The print needs to be strong, 4 perimeters will make it almost completely solid. It might be fine printed with PLA, but will benefit from a stronger material like PC-Blend. 

The jig saw don't have good places to attach a dust extraction so it might be tricky to mount. 

1. The inside on the “shield” has a groove that fits on the metal clip on the front. Looking from the top, push it left.
2. Bend the shield and make sure the hook makes it in between the foot and the machine.
3. The peg on the top right side should fit in the screw hole.
4. The hook goes over on the other side of the machine and connects to a screw hole. It should now be firmly connected to the machine.